The daily cost guide: a river flood is not a burst pipe with more water. It is a different bill, paid in a different order. Here is the order, at real prices.
Published November 9, 2026 · WaterDamageEmergencyNow
A local crew gets it and calls you back.
The Peace River falls below flood stage on Friday. The St. Johns sits at major flood all week. For the homeowners on those rivers, the next bill is not the emergency bill — the 2 a.m. burst-pipe bill this site prices most weeks. It is the re-entry bill: what you pay, in what order, when you walk back into a house that has held river water for days. River water is contaminated water, the drying clock started when the water arrived rather than when it leaves, and the order you buy the work in decides the total. Here is the sequence, at real 2026 prices.
| Job, in re-entry order | Typical range |
|---|---|
| Water damage restoration estimate (walk-through and written quote) | Free at most local companies; get it in writing before any work is sold |
| Emergency water extraction | $3–$7 per square foot of affected area |
| Contaminated-water (river / sewage class) cleanup and sanitizing | $3,000–$8,000 |
| Structural dry-out, room or small area (3–5 days of equipment) | $1,500–$4,500 |
| Average water damage restoration job, measured nationally | About $3,860 (Angi project data) |
| Mold remediation, when the drying window was missed | About $2,400 on average (Angi project data) |
| Whole-home flood recovery, multi-room | $5,000–$15,000 and up |
A burst-pipe job buys extraction and drying. A river job buys those plus the contaminated-water line — and, if the house sat wet for a week, very likely the mold line too. That is the whole difference, and it is why the order below matters.
The week's rivers are still writing this bill in real time: read Monday's St. Johns and Peace River update, and for what the preparation days before a crest are worth, see Sunday's cost guide.
Figures on this page: Angi 2026 cost data (national average water damage job about $3,860; mold remediation about $2,400 on average) and the service ranges published in our own water damage restoration service standard. Prices are ranges, not quotes. River figures: National Weather Service Melbourne and Tampa Bay, November 9, 2026.
In order: the initial estimate is free at most local companies; extraction runs $3 to $7 per square foot; contaminated river-water cleanup and sanitizing runs $3,000 to $8,000; structural dry-out runs $1,500 to $4,500 for a room or small area; mold remediation averages about $2,400; and whole-home multi-room flood recovery runs $5,000 to $15,000 and up. The measured national average water damage job is about $3,860, but river jobs sit above it because of the contaminated-water work.
River water is contaminated water. Beyond the extraction and drying a burst-pipe job needs, a river job adds disinfection of every touched surface and disposal of porous material that absorbed contaminated water - a $3,000 to $8,000 line - and, because the water stays for days, usually mold remediation at about $2,400 on average.
A written estimate naming the affected square footage, the assumed drying days, the per-day cost if drying runs longer, and the water's category (river water should be treated as contaminated). Photograph every room before anything is removed - those photos, the dated forecast, and the crew's moisture readings are your insurance claim file.
Every hour raises the bill. Send the form and a coordinator calls you back within minutes — a real person, 24/7.
A local crew gets it and calls you back.